Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Miami Beach Homeowners Choose PGT Construction
We provide independent PGT construction service in Miami Beach, which means we handle the installation, repair and adjustment of PGT’s impact-rated windows and doors – including the WinGuard impact windows and doors, the Aluminum Series and the Vinyl Series – for owners who already have PGT on their building or who are planning to. We’re not affiliated with PGT and we’re not an authorized dealer, so our loyalty runs to you and to what your Miami Beach home actually needs. Our technicians have up to 14 years of experience, and they see the same handful of failures you’ll see on a barrier island: salt-eaten hardware, seals that give up, and frames that need honest repair-or-replace advice. Call (844) 320-9310 to book a free estimate.

Why Trust Construction Miami Beach for Your PGT Construction?
PGT impact products are built to hold wind-borne debris out during hurricane season. They’re also built to codes that Miami Beach enforces closely, which means repairs aren’t a matter of swapping any old part and hoping the assembly still passes. Our technicians know how these products go together. They understand which components carry wind-load duty – the impact locks, the rollers, the sealed glass units – and which are cosmetic and can be handled with a high-quality substitute.
We use quality parts that fit PGT equipment, and for critical components we go OEM so the door or window stays within its rated design. That’s the warranty-safe path. It’s also the honest one.
What we won’t claim: we’re not factory-trained by PGT, not certified by PGT, and not an authorized representative of the manufacturer. What we can claim is a straightforward, documented approach to PGT work across Miami Beach, from North Beach to the causeways, with the written estimate setting the price before we touch anything. Our technicians have up to 14 years of experience with glass, frames, hardware and the coastal conditions that wear them down. Call (844) 320-9310 for a free estimate.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common PGT Construction Problems We Fix in Miami Beach
Five issues come up over and over on PGT products in Miami Beach. None of them are mysterious once you’ve seen them a dozen times.
- Corroded rollers and hinges in PGT sliding glass doors. Salt-laden air does a number on stainless steel hardware, and sliding doors sit right in the path of it. Over time the rollers stiffen, the door drags, and eventually it won’t latch all the way. That’s a corrosion failure, not a door that’s outgrown its frame.
- Degraded weatherstripping and glazing seals in PGT WinGuard units. UV exposure and heat cycle the seals between panes and around the frames. When they break down, water gets in and fog appears between the glass. Once the sealed unit is compromised, the question is replacement, not repair.
- Misaligned or broken impact locks and handles. PGT impact-rated windows depend on their locking hardware to hold the panel against wind load. Cycles of opening and closing eventually wear the mechanism out of alignment, which affects both security and the wind-load rating.
- Vinyl frame and sash distortion. PGT Vinyl Series windows in a subtropical climate see intense sun for most of the year. Vinyl can distort after prolonged UV and heat, and a distorted frame makes the sash drag, the seal fail, and the unit difficult to operate.
- Sealed unit failure and fogging. Once the seal around the glass assembly is gone, moisture gets between the panes and you get that cloudy look. Cleaning the outside won’t help. The insulated glass unit has to be replaced, or the whole window if the frame is compromised too.
PGT Parts & Our Repair-vs-Replace Approach
Parts selection for PGT work comes down to one rule: anything carrying a structural, impact or lock-duty role gets an OEM PGT part whenever it’s available. Impact-rated locks, rollers and sealed glass units belong in that category because the door or window’s compliance depends on them. For non-structural items – a handle, a trim piece, a gasket on a non-rated component – a high-quality aftermarket equivalent is fine when OEM is unavailable, and we’ll tell you which is which.
Repair is often the right call for hardware and weather-seal problems. A roller and latch replacement on a sliding door extends its life for years. But if a frame is severely corroded, or the vinyl has distorted beyond adjustment, extensive repair can cost more than replacement without giving you back the original rating. We lay it out with prices so you can decide.
Call (844) 320-9310 for a free estimate on your PGT window or door.
Our PGT Service Process – Step by Step
- 1
Diagnosis. We inspect the unit, the hardware, the seals and the surrounding opening. We check whether the failure is mechanical, seal-related, frame-related, or all three – and we tell you which parts need to be rated replacements.
- 2
Repair or install. If we’re repairing, we use OEM or fitting-aftermarket parts and re-align the panel so the latch engages correctly. If we’re installing a new PGT impact window or door, we confirm the rough opening, the flashing sequence and the anchoring match the impact requirements.
- 3
Test. We operate the unit through its full range, verify the lock engages fully, check for air and water leaks, and confirm the sealed unit reads clear. If it doesn’t pass, it doesn’t get signed off.
- 4
Warranty. We hand over documentation of the parts used and the work done, so your records are clean if you ever need to make a PGT warranty claim or a permit inspection needs to see the work.
See the difference
Before
After
Before
After
Before
AfterPGT Products We Service & Install in Miami Beach
We work with PGT WinGuard Impact-Resistant Windows and PGT WinGuard Impact-Resistant Doors – the impact lines most Miami Beach owners already have or are choosing. We also service the PGT Aluminum Series (including the 7000 Series) and the PGT Vinyl Series (including the 3000 Series). That covers sliding glass doors, fixed and operable windows, and impact-rated assemblies common in coastal high-rises and low-rise homes alike. We don’t stock PGT product and we don’t claim to be a PGT dealer; we repair, adjust and install what you have or select, using fitting parts and code-aware methods. Roof repair work that goes with window and door replacement is also within scope – we coordinate it so the flashing, the opening and the roofline all get handled.
We Also Service These Brands
We’re not a single-brand shop. Alongside PGT work we handle KraftMaid cabinetry, Cambria and Silestone countertops, and Kohler fixtures, among more than 50 manufacturer relationships across seven service categories. That matters when your PGT window replacement is part of a larger renovation. One contractor, one schedule, one accountable party from the driveway to the ridge cap. Visit any of our brand hub pages for the specifics on those products and what we do with them.
FAQs – PGT Construction Service in Miami Beach
No. We’re an independent PGT service provider and we’re not affiliated with, authorized by, or endorsed by PGT. We work on PGT products because they’re common on Miami Beach buildings and we know how they fail and how to fix them, but any warranty obligation belongs to PGT and any dealer relationship belongs to someone else. Call (844) 320-9310 for an honest, independent assessment.
Yes. Critical components – impact-rated locks, rollers and sealed glass units – get OEM PGT parts whenever they’re available, because they carry structural and code duty. For non-structural items we use high-quality equivalents when OEM isn’t available, and we tell you which category each part falls into before we order.
Most hardware repairs, realignments and weather-seal work on PGT windows and doors in Miami Beach are done in a single visit. Sealed unit replacements and full window or door replacements take longer because the unit has to be ordered and the install has to be sequenced with weather and any building review. We don’t promise a timeline before we’ve seen the unit; the written estimate lays out what’s realistic.
We cover PGT impact windows and doors, including the WinGuard impact lines, the Aluminum Series (such as the 7000 Series) and the Vinyl Series (such as the 3000 Series). Sliding glass doors, operable windows, fixed assemblies and their hardware are all in scope. Call (844) 320-9310 to confirm coverage for your specific unit.
Not if the service is done correctly with compliant parts. PGT’s warranty depends on the assembly staying within its rated design – the right impact hardware, properly sealed units, and correct installation practices. That’s exactly why we insist on OEM for structural components. We document every part we use so your warranty record stays clean.
Here are typical estimated ranges for the PGT-related work we do most often in Miami Beach. These are estimates only; the written estimate sets the final price.
| Service | Typical Estimated Range |
|---|---|
| Impact Window Installation | $9,440 – $29,500 |
| Window Replacement | $5,310 – $17,700 |
| Roof Repair | $470 – $2,125 |
Call (844) 320-9310 for an exact quote – estimates are free.
Book Your PGT Service in Miami Beach, FL
If your PGT windows or doors are dragging, fogging, or failing to lock, we can take a look and tell you plainly whether it’s a repair or a replacement. Impact Window Installation, Window Replacement and Roof Repair are all within scope, with free estimates and written line-item pricing. Call (844) 320-9310. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Construction Miami Beach.