Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Miami Beach Homeowners Choose Therma-Tru Construction
We provide independent Therma-Tru construction service in Miami Beach. That covers Fiber-Classic and Smooth-Star entry doors, Classic-Craft mahogany and oak doors, and Therma-Tru patio and French door systems with multi-point hardware. What makes our work different is that we treat salt air and storm exposure as the starting point, not an afterthought, so repairs hold up across hurricane seasons instead of failing again by the next one.

Construction Miami Beach is not affiliated with, endorsed by, or authorized by Therma-Tru. We’re an independent construction provider. That independence is a good thing for you: we repair, install and service Therma-Tru equipment with quality parts that fit it, and we tell you plainly when a door is worth fixing and when it isn’t.
Our technicians have up to 14 years of experience with fiberglass and wood-edge door systems, and we handle the surrounding scope too – impact window installation, window replacement and roof repair – so a door project doesn’t stall waiting on another trade. Call (844) 320-9310 to schedule a free estimate.
Why Trust Construction Miami Beach for Your Therma-Tru Construction?
Door work on a barrier island is a different trade than door work inland. Therma-Tru builds entry and patio systems for a national market; Miami Beach puts them through salt-laden air, intense sun, wind-driven rain and king tides that push moisture into places a door was never designed to sit wet. We work on those systems regularly, and we know where they fail here first: the bottom rail, the threshold, the hinge screws, the weatherstripping. That pattern recognition is what keeps a repair from turning into a repeat call.
We use quality parts that fit Therma-Tru equipment – replacement glass, locks, weatherstripping and hardware matched to the slab and frame in front of us. We don’t claim to be a dealer, and we don’t stock OEM components. What we do is source what fits your specific door, install it correctly, and protect the performance the door was rated for. If your door is impact-rated, that rating depends on the whole assembly staying intact, so we treat seals, sweeps and hardware as part of the rating, not as trim.
Everything runs on a written, line-item estimate. You see the parts, the labor and the scope before anyone starts, and the estimate sets the price. Permits are pulled where the work requires them and inspections are passed. On a historic block in Miami Beach, that paperwork matters more than most homeowners expect, and we plan for it up front.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Therma-Tru Construction Problems We Fix in Miami Beach
These are the failures we see most often on Therma-Tru doors in Miami Beach, and why they happen here rather than elsewhere.
- Salt-air corrosion on aluminum thresholds and hinges. The marine air attacks the aluminum threshold and hinge plates first. Once the threshold pits and the hinges loosen, the slab drops slightly out of square and the door starts dragging or refusing to latch. It’s a slow failure that shows up as a “sticking door” long before anyone notices the metal itself.
- Fiberglass skin delamination at the bottom rail. Wind-driven rain sits in the bottom rail after a storm. On fiberglass slabs, that trapped moisture can bubble or lift the skin, and once it starts, patching rarely holds because the water finds the same path back in. This is the one failure where replacement is usually the honest answer.
- Multi-point lock and handle-set misalignment. Humidity swells the slab and the rough opening settles, and the multi-point hardware stops catching cleanly. Sometimes it’s adjustment. Sometimes it’s the frame moving. You need to know which before you touch the lock.
- Failed weatherstripping and sweeps. Sun and salt degrade seals faster here than the manufacturer’s service life assumes. Worn sweeps let wind-driven rain past the slab, and on an impact-rated door that also compromises the assembly’s performance. Seals are cheap compared to what water does behind them.
- Frame and jamb rot at the sill. Water that gets past a failed seal sits at the sill and works on the jamb. By the time a homeowner sees staining inside, the sill area is often already soft. Early inspection is the difference between a seal job and a frame rebuild.
On South Beach’s historic blocks, door and facade work often runs into preservation review, and a permit can sit for months if the details aren’t right. We build that timeline into the plan instead of discovering it mid-job.
Therma-Tru Parts & Our Repair-vs-Replace Approach
We source OEM Therma-Tru replacement glass, locks and weatherstripping for impact-rated doors, because on those systems the label and the fit depend on the right components. For non-critical trim and finishes, quality aftermarket hardware does the job at a better price point, and we’ll tell you which is which.
The repair-or-replace call comes down to structure. Corroded hinges, a pitted threshold, tired seals, a misaligned lock – those are repair work, done on site. A slab or frame compromised by corrosion or delamination is a replacement, and we say so plainly rather than selling a patch that fails by the next storm. Here’s how a typical job usually goes in Miami Beach: a Fiber-Classic entry door starts sticking and failing to latch after a few years because the aluminum threshold has corroded and the hinges have loosened from salt exposure. A qualified local pro removes the slab, cleans or replaces the threshold, re-hangs the door with new hinges, and checks multi-point lock alignment before re-sealing the frame. If the fiberglass skin has delaminated at the bottom rail, the pro advises replacement rather than a patch, since moisture intrusion will return.
Call (844) 320-9310 for a free estimate and a straight answer on repair versus replace.
Our Therma-Tru Service Process – Step by Step
- 1
Diagnosis. We check the slab, threshold, hinges, frame and multi-point hardware together, because a latching problem is rarely just a lock problem. We look for corrosion, delamination and seal failure while we’re at it.
- 2
Repair or install. Repairs are done on site with parts matched to your door. New installs are set plumb and square, flashed and sealed for wind-driven rain, with the rough opening checked before the slab goes in.
- 3
Test. We operate the door through its full swing, verify the multi-point lock engages cleanly, check the sweep and weatherstripping seal, and confirm the assembly performs as it should.
- 4
Warranty and walkthrough. You get a clear explanation of what was done, what to watch for, and how our workmanship warranty covers it. If a permit was required, we close out the inspection.
See the difference
Before
After
Before
After
Before
AfterTherma-Tru Products We Service & Install in Miami Beach
We service and install Therma-Tru entry doors, including Fiber-Classic fiberglass and Smooth-Star fiberglass systems, along with Classic-Craft mahogany and oak entry doors. We also work on Therma-Tru patio and French door systems with multi-point hardware – adjustment, re-glazing, seal replacement and hardware service.
Because these doors sit inside a larger building envelope, we handle the surrounding scope too. Impact window installation and window replacement keep the opening performing to wind-load standards, and roof repair addresses the water that finds its way down to a door frame when the roof above is the real source. On a low-lying barrier island, water rarely respects the boundary between one trade and another, so having one accountable contractor across these categories saves you the coordination.
We Also Service These Brands
Therma-Tru is one focus, not our whole capability. We work with KraftMaid cabinetry, Cambria and Silestone countertops, and Kohler fixtures, alongside a portfolio of more than 50 manufacturer brands across seven service categories. That means one contractor can carry a project from the driveway to the roof, and you won’t be handed off to a subcontractor you’ve never met. We’ll show you options at different price points and explain the trade-offs.
FAQs – Therma-Tru Construction Service in Miami Beach
Is Construction Miami Beach authorized by Therma-Tru? No. Construction Miami Beach is an independent construction provider and is not affiliated with, authorized by, or endorsed by Therma-Tru. We repair, install and service Therma-Tru equipment with quality parts that fit it, and we don’t claim to be a dealer or factory-certified.
Can a Therma-Tru Fiber-Classic door be repaired if the bottom rail is delaminating from salt-air moisture? Usually not reliably. Once the fiberglass skin lifts at the bottom rail, moisture finds the same path back in, and a patch tends to fail by the next storm. In most cases replacement is the honest call. Call (844) 320-9310 for a free estimate – we’ll tell you straight whether a repair will hold.
Why does my Therma-Tru multi-point lock keep misaligning after hurricane season? Humidity swells the slab and the rough opening settles, so the hardware stops catching cleanly. Sometimes it’s an adjustment; sometimes the frame has moved. A proper diagnosis separates the two before anyone touches the lock.
Are OEM Therma-Tru parts necessary for impact-rated door repairs in Miami Beach? For impact-rated doors, yes – we source OEM replacement glass, locks and weatherstripping to preserve the label and fit. For non-critical trim and finishes, quality aftermarket hardware works fine. Call (844) 320-9310 and we’ll walk you through which parts your door needs.
Can a corroded Therma-Tru threshold be replaced without replacing the whole door? Often, yes. A pitted threshold with loosened hinges is repair work: the slab comes out, the threshold is cleaned or replaced, the door is re-hung and the lock alignment is checked. If the frame or slab is structurally compromised, replacement becomes the right answer.
What should I do if my Therma-Tru patio door is leaking during heavy rain? Stop the water from sitting at the sill and get it looked at before the jamb softens. Failed sweeps and weatherstripping are the usual cause, and they’re a fast fix compared to a frame rebuild. Call (844) 320-9310 for a free estimate.
These are typical estimated ranges for the work that surrounds and supports Therma-Tru door service in Miami Beach. The written estimate sets the final price.
| Service | Typical Estimated Range |
|---|---|
| Window Replacement | $5,310 – $17,700 |
| Impact Window Installation | $9,440 – $29,500 |
| Roof Repair | $470 – $2,125 |
Call (844) 320-9310 for an exact quote – estimates are free.
Book Your Therma-Tru Service in Miami Beach, FL
Whether your Therma-Tru door needs a threshold replaced, a lock realigned, or a full install done right for salt air and storm exposure, we’ll give you a written, line-item estimate and a clear answer on repair versus replace. Call (844) 320-9310. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Construction Miami Beach.