Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Miami Beach Homeowners Choose CWS Construction
We provide independent CWS construction service in Miami Beach. That means cabinetry installation and refacing, full kitchen work, and the countertops and backsplash that go with it, handled by technicians who have up to 14 years of experience with CWS boxes, hinges and finishes in this climate. We’re not affiliated with or authorized by CWS; we’re a local construction company that works with CWS products and knows how they actually behave in salt air and steady humidity. Call (844) 320-9310 to talk through your project. We answer 24/7.

Miami Beach is a hard place on cabinets. The subtropical marine air carries salt that works at fasteners and metal hardware, and the swing between air-conditioned interiors and open-window afternoons puts the humidity through daily cycles. Both of those things show up in CWS cabinetry sooner than most owners expect.
Why Trust Construction Miami Beach for Your CWS Construction?
We see CWS cabinetry week in and week out across Miami Beach, and that repetition matters. A technician who has opened the same hinge pattern on dozens of CWS installations knows which failure is edge delamination, which is a hinge that’s given out, and which is water coming up from the floor. Those three look similar from the outside and have completely different fixes.
We get quality parts that fit CWS equipment. When a CWS-specific hinge or glide is no longer made, quality aftermarket soft-close hardware from makers like Blum often outlasts the original and we’ll say so. When a drawer glide needs an exact replacement, we source one that fits the drilling and closes the same way. What we don’t do is promise our work stays inside CWS’s warranty terms, because we’re independent of the manufacturer. We service CWS equipment properly and tell you plainly what that means for any existing coverage you hold.
We also know the repair-versus-replace line in this climate. In a dry market, patching a swollen cabinet box can buy years. Here, the substrate that swelled once will swell again, and pretending otherwise wastes your money. That honesty is the whole point of working with one contractor on cabinets, counters and backsplash instead of three separate trades.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common CWS Construction Problems We Fix in Miami Beach
Here’s what actually fails on the CWS lines we see in Miami Beach, and why. Knowing which door line you own tells you a lot about what to watch for.
- Thermofoil doors delaminating at the edges (CWS Haven series). Thermofoil is a foil wrap over an MDF core, and the seam at the door edge is its weakest point. In a Miami Beach interior cooled all day, the foil and the core expand and contract at slightly different rates through repeated humidity swings. The foil lifts, curls and peels, usually starting at a corner or along the bottom edge of a lower door.
- Painted and foil-wrapped MDF swelling after a leak (CWS Landen). Painted MDF and foil-wrapped doors behave the same way: once water reaches the core, the material swells and doesn’t shrink back. Sink and dishwasher leaks are the usual culprits, and lower cabinets near the dishwasher take the hit first because that’s where a slow supply-line or door-seal failure pools water. A door that’s bubbling near the bottom is a moisture signal, not just a cosmetic problem.
- Soft-close hinges and drawer glides sagging within a few years (CWS Delray full-overlay). Full-overlay doors put more of their weight on the hinge, and salt-laden air is hard on moving hardware. The hinge loses tension, doors stop sitting flush, and drawer fronts pull unevenly. It’s rarely the cabinet’s fault; it’s the hardware doing daily work in a tough environment.
- Cabinet boxes wicking moisture from slab floors (CWS Summerhill and Andover flat-panel lines). Particleboard and MDF boxes draw moisture up from a slab or from baseboard wicking, and the bottom panels crumble. Miami Beach’s low-lying ground and floodplain conditions make slab moisture a standing concern in plenty of homes, and a failing bottom panel is often the first visible sign.
- Door and drawer alignment drift after refacing. A refaced CWS cabinet with new fronts but worn original hinges will drift out of alignment fast. If we’re hanging new doors, we pair them with new hinges and slides so the fix holds instead of chasing it in six months.
CWS Parts & Our Repair-vs-Replace Approach
When a CWS part is discontinued, we look for a quality component that fits the existing drilling and matches how the hardware is meant to close. Blum soft-close hinges and slides are a common answer where the original is unavailable; they’re a better long-term fix than chasing a scarce original that will fail the same way again. We don’t stock OEM or genuine CWS parts, and we don’t claim to.
The repair-or-replace call comes down to substrate. If the boxes are sound and the trouble is fronts and hardware, refacing with CWS-matched doors and drawer fronts keeps the structure and the cost down. If the boxes are swollen or the bottom panels have crumbled, replacement is the honest route because the substrate in this climate keeps failing. We show you both paths and explain the trade-offs before anything gets ordered. Call (844) 320-9310 to get a free estimate.
Our CWS Service Process – Step by Step
- 1
Diagnosis. We inspect the boxes, fronts, hinges and slides, and we check for moisture sources near the sink, dishwasher and slab. That’s how we tell delamination from hardware failure from floor wicking.
- 2
Repair or install. Where boxes hold up, we repair the fronts and re-hang with new hinges and slides. Where we’re installing, we set the CWS boxes level and plumb so the doors sit flush from the start.
- 3
Test. We open and close every door and drawer to check soft-close action and alignment, and confirm the fronts sit even before anything goes on top.
- 4
Countertop and warranty-ready handoff. We prep for quartz or granite only after the cabinets are set and level, and we leave the installation aligned so any warranty you hold with CWS isn’t compromised by poor prep.
See the difference
Before
After
Before
After
Before
AfterCWS Products We Service & Install in Miami Beach
We install and service the CWS cabinet lines we see most in Miami Beach kitchens: the Delray Shaker-style full-overlay line, the Haven thermofoil series, the Landen painted MDF and wood cabinets, and the Summerhill and Andover flat-panel doors. On those, we handle door and drawer-front replacement, hinge and slide replacement, box repair, refacing, and new cabinet installation on a full kitchen remodel. We can also prep a CWS cabinet run for quartz or granite countertops and a backsplash once the boxes are set and level. If you’re unsure which line you have, a look at the door edge and hardware pattern usually tells us.

We Also Service These Brands
CWS is one line of many we work with, so we’re never locked into a single brand. We work with KraftMaid cabinetry, Cambria, Silestone and Kohler among more than 50 manufacturer brands across our trades. That lets us show you options at different price points and explain the real trade-offs, rather than steering you toward whatever promotes one brand. If a different line fits your kitchen better, we’ll tell you.
FAQs – CWS Construction Service in Miami Beach
No. We’re an independent construction company, not affiliated with or authorized by CWS. We install, repair and service CWS equipment with quality parts that fit it, and we’re upfront that we’re not a CWS dealer or factory-trained by the manufacturer.
Yes. We use quality hinges and slides that fit your CWS cabinetry, including Blum and similar soft-close hardware where an original CWS part is discontinued. We don’t stock OEM or genuine CWS parts, but we choose components that fit properly and are built to last in this climate.
Most CWS hardware and front repairs take a day or two once parts are on hand; refacing and full cabinet installation run longer, and a full kitchen remodel depends on scope. We give you a realistic timeline in the estimate rather than a guess, and the written estimate sets the final schedule and price.
We cover the CWS cabinetry lines commonly used in Miami Beach kitchens: Delray Shaker-style full-overlay, Haven thermofoil, Landen painted MDF and wood, and Summerhill and Andover flat-panel doors. That includes doors, drawer fronts, hinges, slides and cabinet boxes.
That depends on the terms of your CWS warranty, which is between you and the manufacturer; as an independent provider we can’t alter or guarantee it. We follow warranty-safe practices, including proper leveling and prep before countertops go on, and we’ll tell you plainly if a repair could affect your coverage.
Typical estimated ranges for the work we do around CWS cabinetry are below. These are estimates only, and the written estimate sets the final price. Call (844) 320-9310 for an exact quote; estimates are free.
| Service | Typical Estimated Range |
|---|---|
| Cabinet Installation | $4,720 – $15,340 |
| Countertop Installation | $2,360 – $7,670 |
| Backsplash Installation | $945 – $2,950 |
| Kitchen Remodel | $16,520 – $53,100 |
| Small Kitchen Remodel | $10,620 – $23,600 |
| Bathroom Remodel | $10,620 – $33,040 |
A homeowner notices CWS thermofoil doors peeling at the corners and drawer fronts no longer sitting flush after a few years in a humid beachside apartment. The usual diagnosis is edge delamination plus soft-close glides that have given out from daily salt-air cycling. A qualified local pro typically removes the failing fronts, repairs or replaces the boxes where swollen, and re-hangs with new hinges and slides. Where the boxes are sound, refacing with new CWS-matched doors and drawer fronts is often the practical route; where the substrate has swelled, full cabinet replacement is the honest call.
Book Your CWS Service in Miami Beach, FL
If your CWS cabinets need attention, we’ll give you a free written estimate with real options and the trade-offs spelled out. Call (844) 320-9310. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. One contractor for cabinets, countertops and the kitchen work around them.
Written by the team at Construction Miami Beach.